Fall Protection Systems

 

 

 

The ultimate aim of fall protection systems  is to avoid fatalities and serious injuries during an emergency evacuation of workers performing work on building sites. While most employers know that both passive and active forms of fall protection equipment are equally efficient, they tend to use different terms for the equipment in question. The result is that some contractors and companies may be classifying equipment based upon their terms rather than those of the regulatory bodies.

 

An example would be concerning fall protection systems. Companies that design and manufacture fall arrest systems will refer to them in terms of either passive or active systems. In the construction industry, this distinction is often made between static control' and 'immobilization'. While each is a valid term, it is not necessarily clear-cut as to what the differences are when it comes to fall protection systems.

 

In the construction industry where the construction of buildings, dams, pipes, and so forth requires the use of heavy materials and the erection of structures using brittle materials then the safety equipment required is a must. This means that in addition to a host of safety fall arrest systems such as manual rails,  osha guardrails, and fall cushions an equally vital set of fall protection systems must also be installed. These will include either manually operated winches or fully automatic ones. Whilst both are highly effective in preventing heavy falls and the entrapment of workers neither is considered the best solution as to why construction workers work best when wearing fall arrest equipment.

 

About fall protection systems for those who perform work under more gentle conditions then there is a vast difference in the way that fall arrest systems are used. For example, where workers are working on raised platforms there must be reliable hydraulic support. If the platform is not raised to an adequate height then there is a real risk that the workers will not be safe from the consequences of the fall if the platform should fall.

 

The best solution for those who perform work where platforms are being raised or lowered is a fully automatic fall arrest system. One of the main reasons that these systems are so successful is that they provide all-around body protection. These mechanisms are designed to securely secure the platform on which people are working and at the same time provide stable support to the weight of the workers. These systems are available from several manufacturers and are found to be highly reliable in many circumstances.

 

There are other types of fall protection systems too which can be used to protect workers from falling. A fall arrest barrier is one such system that can be attached to the top of a scaffold. When the worker is working at a high place and the platform on which he is standing falls then the fall arrest system will catch the fall of the scaffold thereby saving his life. These barriers are made up of a rigid steel frame that is attached to a series of springs. When a worker is using a scaffold he should never attempt to reach any higher than the level of the fall arrest barrier.This link https://en.wikipedia.org/wiki/Guard_rail_(rail) will open up your minds even more on this topic.